Verifying Ipamorelin means matching the listed SKU, the nominal milligrams in each vial, the number of vials in the pack, and the COA issued for that same SKU and batch. Several public sizes exist, so the compound name by itself does not identify the variant or the tested lot. Catalog figures are nominal; recorded analytical values apply only to the named batches below.
Match the SKU, vial size, and pack quantity
Public specifications list CAS number 170851-70-4, molecular formula C38H49N9O5, and molecular weight 711.9. Three public listed SKUs are shown. That SKU scope is public listed variants only, at most 40, and is not a claim that the list is exhaustive (Ipamorelin).
| SKU | Nominal size per vial | Vials per pack |
|---|---|---|
| IP2 | 2 mg | 10 |
| IP5 | 5 mg | 10 |
| IP10 | 10 mg | 10 |
Site editorial guidance treats per-vial size, vials per pack, and pack price as three separate fields. A label such as "10 mg × 10 vials" describes ten vials with a nominal size of 10 mg each. It is not a single vial containing 100 mg. Applied to the listed Ipamorelin SKUs, the nominal sum across one pack is 20 mg for IP2, 50 mg for IP5, and 100 mg for IP10. That sum is label arithmetic, not an analytical measurement. Actual fill and peptide-content measurements belong to the particular batch report.
The same guide’s pre-order checks are: match the exact product and SKU; check the per-vial size and unit; check the number of vials per pack; set the number of packs required; and review the matching batch records and confirm the order details. If a quotation uses a different packaging description, ask support to reconcile it before relying on the calculation.
Find the COA by SKU and batch number
A SKU identifies a listed product variant. A batch number identifies a batch record. Use both when locating a COA: a product name by itself is not enough when several sizes or batches exist (how to find a COA by SKU and batch number). Compare product, SKU, batch, and certificate number. Open the product page, select the SKU, and read the matching certificate panel. Selecting a SKU updates the report without moving the viewing position.
Do not use an IP5 report as evidence for IP10 merely because both say Ipamorelin. An older published batch is not evidence of the batch that will be shipped next. If a public result is missing, ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either. If a previously shared report link is no longer available, ask support for the current documentation rather than substituting a different batch.
How to verify a CertiPeptide COA starts by matching product name, SKU, and batch number, then comparing certificate number and test date with the summary, then using the verification link for that report. A practical sequence is:
- Read the product and SKU from the product page or order documentation.
- Find the batch. If the allocated batch is not stated, ask support to confirm it.
- Open the batch page and check the certificate number, sample identity, test date, and listed laboratory.
- Open the original report and compare the values and units with the summary.
- Follow the report-specific verification link. If the provider requests login or the record cannot be confirmed, resolve that with the provider or support before treating the verification as complete.
A verification page may require an account with the report provider. Seeing a link alone does not prove that a report is currently valid, and a login-protected record is not independently confirmed by the site. Provider verification links were not independently fetched. A published report does not mean every order receives that batch; confirm the batch allocated to the order separately. Do not substitute a report for a similar product or a different size.
Published Ipamorelin batch records
The three records below are published recorded results for those batches only. They are not evidence of clinical suitability or of every batch. Analytes on the certificates are recorded as Ipamorelin IP2, Ipamorelin IP5, and Ipamorelin IP10.
| Field | IP2 / VBBWCZC8IKTF | IP5 / 0MXG6MC80YU2 | IP10 / 1OFJ5TIAFB7R |
|---|---|---|---|
| Certificate | QC-2026-JG9R3L9568 | QC-2026-ADHXRD2T87 | QC-2026-GRJ5VACB9E |
| Test date | 2026-06-19 | 2026-08-12 | 2026-08-12 |
| SKU size | 2 mg | 5 mg | 10 mg |
| Appearance (visual) | White loose powder | White loose powder | White loose powder |
| Mass spectrum (MS) | 711.0 Da | 711.5 Da | 711.4 Da |
| Purity (HPLC) | 99.0 % | 99.5 % | 99.0 % |
| Peptide content (HPLC) | 90.5 % | 92.3 % | 92.1 % |
| Actual fill (gravimetric) | 2.29 mg | 5.98 mg | 11.51 mg |
| Water content (Karl Fischer) | 4.0 % | 5.1 % | 3.6 % |
| Bacterial endotoxins (LAL (gel-clot)) | <3 EU/mg | <3 EU/mg | <3 EU/mg |
All three certificates name Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group) as the laboratory. Each listed test is recorded as Pass. Specifications on those certificates are: appearance, white or almost white loose powder; mass spectrum, 711.9 +/- 1.0 Da; purity, NLT 98.0 %; peptide content, NLT 90.0 %; actual fill, 2 mg, 5 mg, or 10 mg matching the SKU; water content, NMT 8.0 %; bacterial endotoxins, NMT 10 EU/mg. Summary identity, purity, weight, and endotoxin fields match the same recorded values (IP2 / VBBWCZC8IKTF; IP5 / 0MXG6MC80YU2; IP10 / 1OFJ5TIAFB7R).
These pages do not turn unknown items into zeros or passes. They do not document sterility, storage temperature, shipping condition, or suitability for human or veterinary use.
Checklist
- Match product name Ipamorelin and the exact SKU (IP2, IP5, or IP10).
- Read milligrams per vial separately from the 10 vials per listed pack.
- Match batch number and certificate number on the batch page to the original report.
- Compare analyte, method, units, qualifiers such as NLT, NMT, and <, and the recorded Pass text exactly.
- Do not reuse another size’s COA.
- Treat a missing public COA as unknown, not as a pass or a fail.
- Confirm the batch allocated to the order; a published example is not a shipping promise.
Frequently Asked Questions
Does a published Ipamorelin COA mean every order receives that batch?
No. Confirm the batch allocated to the order separately. An older published batch is not evidence of the batch that will be shipped next.
Can an IP5 report be used as evidence for IP10?
No. A report for one SKU should not be used as evidence for another size merely because both are named Ipamorelin.
What if a public Ipamorelin COA is missing?
Ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either. Do not substitute a different batch.
Which Ipamorelin SKUs and pack sizes are publicly listed?
IP2 (2 mg per vial, 10 vials per pack), IP5 (5 mg per vial, 10 vials per pack), and IP10 (10 mg per vial, 10 vials per pack). That list is public listed variants only, at most 40, and is not a claim that it is exhaustive.
What if the COA verification provider requires login?
Use the provider’s normal access process. Seeing a link alone does not prove that a report is currently valid. A login-protected record is not independently confirmed by the site. Provider verification links were not independently fetched.
Explore Further
Browse our research peptide catalog and review third-party lab reports & COAs for published batches.
---
Research use only. The information above is provided for educational and laboratory research purposes only. The compounds discussed are not approved for human or veterinary use, diagnosis, treatment, or the prevention of any disease. Nothing here is medical advice.
