To verify a Humanin listing, match the catalog SKU, the per-vial size, the vials-per-pack count, and a named batch certificate of analysis (COA). The compound name alone is not enough when sizes or batches differ. The public catalog lists HUMANIN10 as 10 mg per vial with 10 vials per pack. One published laboratory record, batch 9EI14VPYRPCB, applies only to that SKU and batch. Site pages on pack quantity, finding a COA, and checking a certificate are editorial guidance for reading those records, not independent scientific evidence.
Match the listed SKU, vial size, and pack quantity
The Humanin product specification records CAS number 330936-69-1, molecular formula C119H204N34O32S2, and molecular weight 2687.3. Those values are nominal catalog facts, not measurements from a particular vial. Public listed variants only are shown, at most 40, and that is not a claim that the list is exhaustive.
| Field | Listed value |
|---|---|
| Product | Humanin |
| SKU | HUMANIN10 |
| Nominal size per vial | 10 mg |
| Vials per pack | 10 |
Editorial guidance on per-vial size versus pack quantity treats per-vial size, vials per pack, and pack price as three separate fields. A description such as "10 mg × 10 vials" means ten vials with a nominal size of 10 mg each. It is not a single vial containing 100 mg. For HUMANIN10, any 100 mg pack sum is label arithmetic, not an analytical measurement. Actual fill and peptide-content figures belong to the particular batch report.
Checks before ordering from that guide are: match the exact product and SKU; check the per-vial size and unit; check the number of vials per pack; set the number of packs required; and review the matching batch records and confirm the order details. If a quotation or other documentation uses a different packaging description, ask support to reconcile it before relying on the calculation. The product page shows the price of one listed pack. Selecting a different SKU can change both the pack price and the available stock. Display currency follows the selected country, and checkout confirms the order total, shipping, and any applicable discount. A saved screenshot can become outdated when prices or availability change.
Find the COA by SKU and batch number
How to find a COA by SKU and batch number distinguishes the two identifiers: a SKU identifies a listed product variant, and a batch number identifies a batch record. Use both when locating a certificate. Compare product name, SKU, batch, and certificate number. Open the product page, select the SKU, and read the matching certificate panel. Selecting a SKU updates the report without moving the viewing position.
Do not treat a report for another size as evidence for HUMANIN10 merely because both name Humanin. An older published batch is not evidence of the batch that will be shipped next. When a public result is missing, ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either. If a previously shared report link is no longer available, ask support for the current documentation rather than substituting a different batch.
Published results for batch 9EI14VPYRPCB
The Humanin batch 9EI14VPYRPCB record lists certificate number QC-2026-NE82MPBAFL, laboratory Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group), and test date 2026-06-19. The SKU on the record is HUMANIN10 with size 10 mg. The published scope is recorded results for this batch only. Provider verification links were not independently fetched. The record is not evidence of clinical suitability or of every batch.
Summary rows on that record:
| Report type | Result | Recorded pass |
|---|---|---|
| Identity | 2686.4 Da | true |
| Weight | 10.88 mg | true |
| Endotoxin | <3 EU/mg | true |
| Purity | 99.2 % | true |
Item-level tests, each with analyte Humanin HUMANIN10:
| Item | Method | Specification | Result | Determination |
|---|---|---|---|---|
| Appearance | Visual | White or almost white loose powder | White loose powder | Pass |
| Mass spectrum | MS | 2687.3 +/- 1.0 Da | 2686.4 Da | Pass |
| Purity | HPLC | NLT 98.0 % | 99.2 % | Pass |
| Peptide content | HPLC | NLT 90.0 % | 92.8 % | Pass |
| Actual fill | Gravimetric | 10 mg | 10.88 mg | Pass |
| Water content | Karl Fischer | NMT 8.0 % | 5.1 % | Pass |
| Bacterial endotoxins | LAL (gel-clot) | NMT 10 EU/mg | <3 EU/mg | Pass |
Unknown tests are not recorded as zero, pass, or evidence of absence. These determinations apply only to the named batch and SKU.
Confirm the certificate against the original report
How to verify a CertiPeptide COA starts with matching product name, SKU, and batch number. Open the original report and compare its certificate number and test date with the summary, then use the verification link for that report. A verification page may require an account with the report provider; seeing a link alone does not prove that a report is currently valid.
A practical sequence from that guide:
- Read the product and SKU from the product page or order documentation.
- Find the batch. If the allocated batch is not stated, ask support to confirm it.
- Open the batch page and check the certificate number, sample identity, test date, and listed laboratory.
- Open the original report and compare the values and units with the summary.
- Follow the report-specific verification link. If the provider requests login or the record cannot be confirmed, resolve that with the provider or support before treating the verification as complete.
If details differ, do not substitute a report for a similar product or a different size. Send support the SKU, batch number, and the specific difference. A screenshot of a certificate is useful for comparison, but the original document and provider record are stronger verification evidence. A published report does not mean every order receives that batch; confirm the batch allocated to the order separately.
Verification checklist
- Confirm the product name Humanin and SKU HUMANIN10 on the catalog page.
- Read 10 mg as the nominal size per vial and 10 as vials per pack, not as one 100 mg vial.
- Treat 100 mg across the pack as label arithmetic only.
- Locate the COA with both SKU and batch number, not the product name alone.
- For the published example, match batch 9EI14VPYRPCB and certificate QC-2026-NE82MPBAFL on the batch page.
- Compare each analyte, method, unit, qualifier, and determination with the original report.
- Do not use another size or an older batch as a stand-in.
- Confirm the allocated batch for a given order separately from any published example.
Frequently Asked Questions
Does a published Humanin report mean every order receives batch 9EI14VPYRPCB?
No. A published report does not mean every order receives that batch. Confirm the batch allocated to the order separately.
How should HUMANIN10 packaging be read?
HUMANIN10 is listed as 10 mg per vial and 10 vials per pack. That describes ten vials with a nominal size of 10 mg each, not a single vial containing 100 mg. The 100 mg pack sum is label arithmetic, not an analytical measurement.
Which identifiers belong to the published Humanin COA example?
The published record is batch 9EI14VPYRPCB, certificate QC-2026-NE82MPBAFL, SKU HUMANIN10 (10 mg), laboratory Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group), test date 2026-06-19. Those results apply only to that batch and SKU.
What if the verification provider requires login?
Use the provider’s normal access process. Seeing a link alone does not prove that a report is currently valid, and the website does not independently confirm the current status of a login-protected record.
Explore Further
Browse our research peptide catalog and review third-party lab reports & COAs for published batches.
---
Research use only. The information above is provided for educational and laboratory research purposes only. The compounds discussed are not approved for human or veterinary use, diagnosis, treatment, or the prevention of any disease. Nothing here is medical advice.
