To verify GHRP-6 Acetate, match the listed SKU, the nominal milligrams per vial and the vials per pack, then open the certificate of analysis that names that same SKU and batch. The GHRP-6 Acetate catalog lists G65 (5 mg), G610 (10 mg) and G615 (15 mg), each packed as 10 vials. Those sizes are nominal catalog fields, not a substitute for the fill, HPLC purity or peptide-content numbers on a named batch report.
Listed SKUs, vial size and pack quantity
The GHRP-6 Acetate listing gives CAS number 87616-84-0, molecular formula C46H56N12O6 and molecular weight 873.0. Three public SKUs are published there. The listing describes that set as public listed variants only, at most 40, not a claim that the list is exhaustive.
| SKU | Nominal size per vial | Vials per pack |
|---|---|---|
| G65 | 5 mg | 10 |
| G610 | 10 mg | 10 |
| G615 | 15 mg | 10 |
Editorial guidance on reading a product SKU treats per-vial size, vials per pack and pack price as three separate fields. A label such as "10 mg × 10 vials" describes ten vials with a nominal size of 10 mg each. It is not a single vial containing 100 mg. The pack sum is label arithmetic, not an analytical measurement. Actual fill and peptide-content measurements belong to the particular batch report.
Before ordering, match the exact product and SKU, check the per-vial size and unit, check the number of vials per pack, set the number of packs required, and review the matching batch records. If a quotation uses a different packaging description, ask support to reconcile it before relying on the calculation.
Matching a COA to SKU and batch
A SKU identifies a listed product variant; a batch number identifies a batch record. Use both when locating a COA. The product name alone is not enough when several sizes or batches exist. Open the product page, select the SKU, and read the matching certificate panel.
A report for G65 should not be used as evidence for G610 merely because both say GHRP-6 Acetate. Likewise, an older published batch is not evidence of the batch that will be shipped next. A published report does not mean every order receives that batch; confirm the batch allocated to the order separately.
How to verify a CertiPeptide COA outlines this sequence: read the product and SKU from the product page or order documentation; find the batch; if the allocated batch is not stated, ask support to confirm it; open the batch page and check the certificate number, sample identity, test date and listed laboratory; open the original report and compare the values and units with the summary; then follow the report-specific verification link. A verification page may require an account with the report provider. Seeing a link alone does not prove that a report is currently valid. The published GHRP-6 Acetate records state that provider verification links were not independently fetched.
If a public result is missing, ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either. If a previously shared report link is no longer available, ask support for the current documentation rather than substituting a different batch. Do not substitute a report for a similar product or a different size.
Published batch records for G65, G610 and G615
The table below records published results for three named batches only: G65 / YGG6IMWQO218, G610 / Z3UCE5IHP1OQ and G615 / HI0BCQUEPUOP. Each certificate names Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group) and test date 2026-08-15. Test rows identify the analyte as GHRP-6 Acetate G65, GHRP-6 Acetate G610 or GHRP-6 Acetate G615. These records apply only to the named SKU and batch. They are not evidence of clinical suitability or of every batch.
| Item (method) | G65 / YGG6IMWQO218 | G610 / Z3UCE5IHP1OQ | G615 / HI0BCQUEPUOP |
|---|---|---|---|
| Certificate | QC-2026-LKEZD86HZE | QC-2026-NQFPCTY3HJ | QC-2026-HK3GRB4QWZ |
| Nominal size | 5 mg | 10 mg | 15 mg |
| Appearance (Visual) | White loose powder (specification: White or almost white loose powder); Pass | White loose powder (specification: White or almost white loose powder); Pass | White loose powder (specification: White or almost white loose powder); Pass |
| Mass spectrum (MS) | 872.1 Da (specification: 873 +/- 1.0 Da); Pass | 872.1 Da (specification: 873 +/- 1.0 Da); Pass | 872.1 Da (specification: 873 +/- 1.0 Da); Pass |
| Purity (HPLC) | 98.9 % (NLT 98.0 %); Pass | 99.1 % (NLT 98.0 %); Pass | 99.0 % (NLT 98.0 %); Pass |
| Peptide content (HPLC) | 92.5 % (NLT 90.0 %); Pass | 90.3 % (NLT 90.0 %); Pass | 92.7 % (NLT 90.0 %); Pass |
| Actual fill (Gravimetric) | 5.28 mg (specification: 5 mg); Pass | 10.88 mg (specification: 10 mg); Pass | 16.20 mg (specification: 15 mg); Pass |
| Water content (Karl Fischer) | 5.8 % (NMT 8.0 %); Pass | 5.6 % (NMT 8.0 %); Pass | 4.3 % (NMT 8.0 %); Pass |
| Bacterial endotoxins (LAL (gel-clot)) | <3 EU/mg (NMT 10 EU/mg); Pass | <3 EU/mg (NMT 10 EU/mg); Pass | <3 EU/mg (NMT 10 EU/mg); Pass |
Nominal catalog milligrams and measured fill are different fields. On these certificates the gravimetric fills were 5.28 mg, 10.88 mg and 16.20 mg. HPLC peptide content (92.5 %, 90.3 %, 92.7 %) is a separate analyte from HPLC purity (98.9 %, 99.1 %, 99.0 %). Identity summary values on all three records are 872.1 Da. Endotoxin results are recorded as <3 EU/mg; that qualifier is not a numeric zero, and it is not a sterility result.
Checklist before you rely on a listing
- Match product name GHRP-6 Acetate and SKU G65, G610 or G615 on the product page.
- Check nominal size per vial (5 mg, 10 mg or 15 mg) and the unit.
- Check 10 vials per pack and the number of packs; do not treat pack-sum milligrams as measured fill.
- Locate the batch number and certificate number for that SKU.
- Compare certificate number, test date, laboratory and sample identity with the batch page.
- Compare each analyte, method, specification, result, unit and determination with the original report.
- Follow the report-specific verification link; if login is required or the record cannot be confirmed, resolve that before treating verification as complete.
- If the allocated batch is unstated, a public report is missing or any field differs, ask support rather than substituting another SKU or batch.
These sources do not identify the batch that will ship on a future order, do not cover unlisted SKUs, do not independently confirm provider verification pages, and do not record storage, shipping, sterility or use suitability beyond the named tests.
Frequently Asked Questions
Does a published GHRP-6 Acetate report mean every order receives that batch?
No. Confirm the batch allocated to the order separately. An older published batch is not evidence of the batch that will be shipped next.
Can a G65 COA be used as evidence for G610 or G615?
No. A report for one size should not be used as evidence for another size merely because both name GHRP-6 Acetate. Use the SKU and batch number together.
What identifiers should match on the COA?
Start with product name, SKU and batch number. Then compare certificate number, sample identity, test date and listed laboratory, and compare values and units with the original report.
What if a public COA is missing or the verification link needs a login?
Ask support for the exact SKU and batch. A missing public result is not a failed test and is not a passed test. Seeing a verification link alone does not prove the report is currently valid; if the provider requires login or the record cannot be confirmed, resolve that before treating verification as complete.
Explore Further
Browse our research peptide catalog and review third-party lab reports & COAs for published batches.
---
Research use only. The information above is provided for educational and laboratory research purposes only. The compounds discussed are not approved for human or veterinary use, diagnosis, treatment, or the prevention of any disease. Nothing here is medical advice.
