To verify a listed CJC-1295 + Ipamorelin Blend pack, match the catalog SKU, the nominal milligrams per vial, and the vials-per-pack count, then open the certificate that names that same SKU and batch. Published COA figures apply only to the tested lot and size. They are not evidence for a single-ingredient Ipamorelin vial, for a different milligram SKU, or for every future shipment.
Listed SKUs, vial size, and pack quantity
The public specification lists two variants: SKU CP10 at a nominal 10 mg per vial with 10 vials per pack, and SKU CP20 at a nominal 20 mg per vial with 10 vials per pack (CJC-1295 + Ipamorelin Blend). Those values are catalog labels. The listing states that the SKU table covers public listed variants only (at most 40) and is not a claim that the list is exhaustive. CAS number, molecular formula, and molecular weight are recorded as unknown on that page.
Editorial guidance treats per-vial size, vials per pack, and pack price as three separate fields (Per-vial size versus pack quantity). A description such as “10 mg × 10 vials” means ten vials with a nominal size of 10 mg each; it is not a single vial containing 100 mg. Any pack total is label arithmetic, not an analytical measurement. Actual fill and peptide-content results belong to the particular batch report. For a blend, check whether the stated size is combined and read the separate ingredient information. This blend’s public specification does not publish a milligram split between the two named peptides.
| SKU | Nominal size per vial | Size unit | Vials per pack |
|---|---|---|---|
| CP10 | 10 | mg | 10 |
| CP20 | 20 | mg | 10 |
Before ordering, match the exact product and SKU; check the per-vial size and unit; check the number of vials per pack; set the number of packs required; and review the matching batch records. If a quotation uses a different packaging description, ask support to reconcile it before relying on the calculation (Per-vial size versus pack quantity).
Match the COA to the same product, SKU, and batch
A SKU identifies a listed product variant. A batch number identifies a batch record. Use both when locating a COA; a product name by itself is not enough when several sizes or batches exist (How to find a COA by SKU and batch). Open the product page, select the SKU, and read the matching certificate panel.
A report for one size should not be used as evidence for another size merely because both share the blend name. An older published batch is not evidence of the batch that will be shipped next. Blends are separate products, not interchangeable aliases for their ingredients. Use the complete blend name and SKU; do not substitute Ipamorelin SKUs IP2, IP5, or IP10, or those ingredient certificates, for this blend (How to find a COA by SKU and batch).
If a public result is missing, ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either.
Published CP10 and CP20 batch records
The following values are recorded results for those batches only. Provider verification links were not independently fetched. They are not evidence of clinical suitability or of every batch.
CP10 — batch YD3LR42O6GDJ. Certificate QC-2026-SNXMCPJKE6, laboratory Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group), test date 2026-08-12, SKU CP10, 10 mg (batch YD3LR42O6GDJ). Summary: Identity Conforms; Purity 99.6 %; Weight 11.95 mg; Endotoxin <3 EU/mg.
| Item | Analyte | Method | Specification | Result | Determination |
|---|---|---|---|---|---|
| Appearance | CJC-1295 + Ipamorelin Blend CP10 | Visual | White or almost white loose powder | White loose powder | Pass |
| Mass spectrum | CJC-1295 + Ipamorelin Blend CP10 | MS | Corresponds to theoretical mass | Conforms | Pass |
| Purity | CJC-1295 + Ipamorelin Blend CP10 | HPLC | NLT 98.0 % | 99.6 % | Pass |
| Total peptide content | CJC-1295 + Ipamorelin Blend CP10 | HPLC | NLT 90.0 % | 91.0 % | Pass |
| Actual fill | CJC-1295 + Ipamorelin Blend CP10 | Gravimetric | 10 mg | 11.95 mg | Pass |
| Water content | CJC-1295 + Ipamorelin Blend CP10 | Karl Fischer | NMT 8.0 % | 5.2 % | Pass |
| Bacterial endotoxins | CJC-1295 + Ipamorelin Blend CP10 | LAL (gel-clot) | NMT 10 EU/mg | <3 EU/mg | Pass |
CP20 — batch L08SHR1H3PAN. Certificate QC-2026-DTTB5DDKCP, laboratory Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group), test date 2026-08-12, SKU CP20, 20 mg (batch L08SHR1H3PAN). Summary: Identity Conforms; Purity 98.6 %; Weight 22.65 mg; Endotoxin <3 EU/mg.
| Item | Analyte | Method | Specification | Result | Determination |
|---|---|---|---|---|---|
| Appearance | CJC-1295 + Ipamorelin Blend CP20 | Visual | White or almost white loose powder | White loose powder | Pass |
| Mass spectrum | CJC-1295 + Ipamorelin Blend CP20 | MS | Corresponds to theoretical mass | Conforms | Pass |
| Purity | CJC-1295 + Ipamorelin Blend CP20 | HPLC | NLT 98.0 % | 98.6 % | Pass |
| Total peptide content | CJC-1295 + Ipamorelin Blend CP20 | HPLC | NLT 90.0 % | 92.3 % | Pass |
| Actual fill | CJC-1295 + Ipamorelin Blend CP20 | Gravimetric | 20 mg | 22.65 mg | Pass |
| Water content | CJC-1295 + Ipamorelin Blend CP20 | Karl Fischer | NMT 8.0 % | 5.7 % | Pass |
| Bacterial endotoxins | CJC-1295 + Ipamorelin Blend CP20 | LAL (gel-clot) | NMT 10 EU/mg | <3 EU/mg | Pass |
Unknown catalog fields are not zeros, and a Pass determination is not evidence of an untested property. Endotoxin by LAL (gel-clot) is not a sterility result. Nominal 10 mg or 20 mg on the SKU is not the same number as the gravimetric actual fill on these certificates.
Verification sequence and checklist
Start by matching product name, SKU, and batch number. Open the original report and compare its certificate number and test date with the summary. Then use the verification link for that report. A verification page may require an account with the report provider; seeing a link alone does not prove that a report is currently valid (How to verify a CertiPeptide COA).
Editorial sequence:
- Read the product and SKU from the product page or order documentation.
- Find the batch. If the allocated batch is not stated, ask support to confirm it.
- Check certificate number, sample identity, test date, and listed laboratory.
- Compare values and units on the original report with the summary.
- Follow the report-specific verification link. If login is required or the record cannot be confirmed, resolve that with the provider or support before treating verification as complete.
Do not substitute a report for a similar product or a different size. Send support the SKU, batch number, and the specific difference. A published report does not mean every order receives that batch; confirm the allocated batch separately.
Checklist
- Product name is CJC-1295 + Ipamorelin Blend, not Ipamorelin alone.
- SKU is CP10 (10 mg/vial, 10 vials/pack) or CP20 (20 mg/vial, 10 vials/pack).
- Batch and certificate numbers on the document match the batch page (examples: YD3LR42O6GDJ / QC-2026-SNXMCPJKE6 for CP10; L08SHR1H3PAN / QC-2026-DTTB5DDKCP for CP20).
- Analyte text names the blend and the SKU.
- Methods, units, and qualifiers (NLT, NMT, <) are copied as recorded.
- Actual fill is compared with the gravimetric result for that batch, not only the catalog size.
- Unlisted tests remain unknown.
These records do not establish storage temperature, shipping condition, dosing, or human or veterinary suitability.
Frequently Asked Questions
Which public SKUs are listed for CJC-1295 + Ipamorelin Blend?
The public listing shows CP10 (nominal 10 mg per vial, 10 vials per pack) and CP20 (nominal 20 mg per vial, 10 vials per pack). That table covers public listed variants only (at most 40) and is not a claim that the list is exhaustive.
Can a published blend COA be used for a different size or a later shipment?
No. A report for one size should not be used as evidence for another size merely because both share the blend name. An older published batch is not evidence of the batch that will be shipped next. Confirm the batch allocated to the order separately.
Can an Ipamorelin COA verify the blend?
No. Blends are separate products, not interchangeable aliases for their ingredients. Use the complete blend name and SKU (CP10 or CP20). Ipamorelin SKUs IP2, IP5, and IP10 identify a different listed product.
What if no public report is listed for my batch?
Ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either.
Does seeing a verification link prove the report is currently valid?
No. Seeing a link alone does not prove that a report is currently valid. A verification page may require an account with the report provider.
Explore Further
Browse our research peptide catalog and review third-party lab reports & COAs for published batches.
---
Research use only. The information above is provided for educational and laboratory research purposes only. The compounds discussed are not approved for human or veterinary use, diagnosis, treatment, or the prevention of any disease. Nothing here is medical advice.
