Verifying Adipotide (FTPP) is a matching task: confirm the listed SKU, the per-vial size, and the vials per pack, then open the certificate that names that same SKU and batch. Catalog milligram amounts are nominal. Recorded identity, purity, fill, water, and endotoxin values apply only to the tested batch. A product name alone is not enough when several sizes exist, and a report for one vial size is not evidence for another.
Listed SKUs, vial size, and pack quantity
The public Adipotide (FTPP) listing records CAS number 859216-15-2, molecular formula C111H206N36O28S2, and molecular weight 2557.2. Three public variants are shown. The SKU scope is public listed variants only (at most 40) and is not a claim that the list is exhaustive.
| SKU code | Nominal size per vial | Vials per pack |
|---|---|---|
| APT2 | 2 mg | 10 |
| APT5 | 5 mg | 10 |
| AP10 | 10 mg | 10 |
Site editorial guidance on per-vial size versus pack quantity treats per-vial size, vials per pack, and pack price as three separate fields. A description such as "10 mg × 10 vials" means ten vials with a nominal size of 10 mg each. It is not a single vial containing 100 mg. The pack sum is label arithmetic, not an analytical measurement. Actual fill and peptide-content measurements belong to the particular batch report.
Before ordering, match the exact product and SKU, check the per-vial size and unit, check vials per pack, set the number of packs required, and review matching batch records. If a quotation uses a different packaging description, ask support to reconcile it before relying on the calculation. Selecting a different SKU can change pack price and available stock. A saved screenshot can become outdated when prices or availability change.
Match the batch COA to that SKU
A SKU identifies a listed product variant. A batch number identifies a batch record. Use both when locating a COA, as the site guide how to find a COA by SKU and batch explains. Compare product name, SKU, batch, and certificate number. Open the product page, select the SKU, and read the matching certificate panel. Open a batch's fixed page to share its results, and match the original document before relying on it.
Do not use an APT2 report as evidence for AP10, or an APT5 report as evidence for APT2, merely because each names Adipotide (FTPP). An older published batch is not evidence of the batch that will be shipped next. If a public result is missing, ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either. If a previously shared report link is no longer available, ask for current documentation rather than substituting a different batch.
The site guide how to verify a CertiPeptide COA starts by matching product name, SKU, and batch number. Open the original report and compare its certificate number and test date with the summary. Then use the verification link for that report. A verification page may require an account with the report provider; seeing a link alone does not prove that a report is currently valid. Provider verification links for the batches below were not independently fetched.
A published report does not mean every order receives that batch. Confirm the batch allocated to the order separately. Do not substitute a report for a similar product or a different size. Send support the SKU, batch number, and the specific difference.
Recorded results for three published batches
The certificates below are published recorded results for those batches only. They are not evidence of clinical suitability or of every batch. Each names Stand Science & Technology Pharmaceutical (Qingdao) Co., Ltd. (Stand Group) and test date 2026-07-21.
- APT2, 2 mg: batch V3XWULOBG2ZF, certificate QC-2026-X3YMAKQXU6, analyte Adipotide (FTPP) APT2.
- APT5, 5 mg: batch D2EIH0DHDKLP, certificate QC-2026-5FP8AJ4UJJ, analyte Adipotide (FTPP) APT5.
- AP10, 10 mg: batch SQ9A3MZPTBJ9, certificate QC-2026-RZ5SDQ9BLT, analyte Adipotide (FTPP) AP10.
| Item | Method | Specification | APT2 result | APT5 result | AP10 result |
|---|---|---|---|---|---|
| Appearance | Visual | White or almost white loose powder | White loose powder; Pass | White loose powder; Pass | White loose powder; Pass |
| Mass spectrum | MS | 2557.2 +/- 1.0 Da | 2556.7 Da; Pass | 2556.2 Da; Pass | 2556.9 Da; Pass |
| Purity | HPLC | NLT 98.0 % | 99.7 %; Pass | 98.6 %; Pass | 99.3 %; Pass |
| Peptide content | HPLC | NLT 90.0 % | 91.7 %; Pass | 90.2 %; Pass | 93.5 %; Pass |
| Actual fill | Gravimetric | 2 mg (APT2); 5 mg (APT5); 10 mg (AP10) | 2.28 mg; Pass | 5.65 mg; Pass | 11.02 mg; Pass |
| Water content | Karl Fischer | NMT 8.0 % | 3.3 %; Pass | 5.1 %; Pass | 4.0 %; Pass |
| Bacterial endotoxins | LAL (gel-clot) | NMT 10 EU/mg | <3 EU/mg; Pass | <3 EU/mg; Pass | <3 EU/mg; Pass |
Headline identity, purity, weight, and endotoxin figures on those pages match the mass-spectrum, purity, actual-fill, and endotoxin rows. Unknown tests are not zeros, passes, or evidence of absence. An endotoxin result is not a sterility determination.
Verification checklist
- Product name is Adipotide (FTPP), not a neighboring peptide or blend.
- SKU is APT2, APT5, or AP10, matching the vial in hand.
- Per-vial size is 2 mg, 5 mg, or 10 mg, and the listed pack is 10 vials.
- Batch number on the allocation matches the batch page, not a different size.
- Certificate number, laboratory name, and test date match the original report.
- Each line item is compared with the same analyte, method, specification, result, units, and determination.
- Verification is not treated as complete if the provider record cannot be confirmed.
- A missing public COA is referred to support instead of being read as pass or fail.
If any field disagrees, stop and ask support to reconcile the SKU, batch, and the specific difference rather than borrowing a nearby certificate.
Frequently Asked Questions
Which Adipotide (FTPP) SKUs are publicly listed?
The public listing shows APT2 (2 mg per vial, 10 vials per pack), APT5 (5 mg per vial, 10 vials per pack), and AP10 (10 mg per vial, 10 vials per pack). That table is limited to public listed variants and is not a claim that the list is exhaustive.
Can a COA for APT2 be used as evidence for AP10?
No. A report for one listed size should not be used as evidence for another size merely because both are named Adipotide (FTPP). Match product name, SKU, and batch number.
Does a published Adipotide (FTPP) report mean every order receives that batch?
No. Confirm the batch allocated to the order separately. An older published batch is not evidence of the batch that will be shipped next.
What if no public COA appears for my SKU and batch?
Ask support for the exact SKU and batch. A missing public result is not automatically a failed test, and it is not a passed test either. Do not substitute a different batch.
What identity and purity values were recorded for APT2 batch V3XWULOBG2ZF?
On certificate QC-2026-X3YMAKQXU6 (test date 2026-07-21), mass spectrum was 2556.7 Da (MS; specification 2557.2 +/- 1.0 Da) and HPLC purity was 99.7 % (specification NLT 98.0 %), both Pass. Those values apply only to that APT2 batch.
Explore Further
Browse our research peptide catalog and review third-party lab reports & COAs for published batches.
---
Research use only. The information above is provided for educational and laboratory research purposes only. The compounds discussed are not approved for human or veterinary use, diagnosis, treatment, or the prevention of any disease. Nothing here is medical advice.
